Order within the next hrs mins secs for Same-Day Shipping.
Go

FAQ

Installation

00 Clutch Installation How to Install Your New Clutch
19 Conversion Kits Installing our upgraded clutches

Electrical

1 Checking System Voltage How to properly check system voltage
2 System Voltage Problem Discuss how to diagnose the stator, rectifier, and battery
3 Voltage Too High How to diagnose why the voltage is too high
4 No Power To Clutch Safety switches, seat switch, Reverse Switch & PTO switch
5 Blowing Fuses Diagnosing electrical shorts and diodes

Electrical/Mechanical

6 Overheat Two types of clutch overheat failures - Mechanical & Electrical
7 Engine Stalls Also See: "No Power To Clutch (4)"
8 Noise at Idle Discuss the possible failures
21 Slippage Why is my clutch slipping?

Mechanical

9 Old Clutch is Stuck Removal Technics
10 Cannot get clutch on Crankshaft swelling, anti rotation, burrs on the crankshaft.
11 Torqueing the clutch Why its important, and how to techniques
12 Burnishing Why its important, and how to properly burnish
13A The Column D-spacers vs. Washers as they relate to crankshaft length
13B The Column Same as 13A with an actual clutch
14 Anti-Rotation Brackets Discuss the proper fit for an anti-rotation & Installation Rules
18 CW & CCW Clutch Orientation The Differences in Clutch Rotations

Clutch Diagnostics

15 Disassembling a Clutch How to take a clutch apart for inspection
16 Re-assembling a Clutch How to properly re-assemble a clutch
17 Checking the Clutch Coil Resistance checking, the light bulb therory & bench testing